SW Tech Equipment, Inc.

The World's Best Enameled Wire and Ribbon Parallel Gap Welders

Parallel Gap Welder Premium, SMAPRO180

Building on a long record of excellence, the SMAPRO180 is our next generation PG welder, incorporating the most advanced hardware and software technologies. An upadted and refined digital user interface allows for fthe tuning and saving of settings for up to 10 different processes. This feature is important as it increases the consistency between processes and operators.

Specially engineered for large volume production and automatic production lines, the SMAPRO180 is fully compatable with RS232 and RS485 allowing full integration into your production line and offering welding parameters feedback for real time production flow and quality control monitoring.  The basic settings are user defined and can go low and fine enough to bond very delicate, fine gold wire, yet is also powerful enough to power through 28 gauge enameled wire! The key to the flexibility is our specially developed power and pulse algorithms. The parameters are user set and then automatically refined through a dedicated on-board processor using our tired and tested algorithms. This patented algorithm brings the full weight of our R&D team to your side when developing and perfecting process. In addition to enameled wire welding, the Parallel Gap Welders can also be used to weld metal wires and metal ribbon to a wide variety of surfaces. We have achieved superior bonding performance over other bonding methods with Gold Wire and Gold Ribbon applications. Everything from printed circuit board traces to thin and thick film materials; copper, stainless steel, zinc, gold, and more. Our machines provide the best quality, highest strength, most reliable, consistent, and cost effective welding joints for a wide variety of electronic and mechanical applications.A distinct advantage of the PG welding process is that it is naturally RoHS Compliant as no toxic soldering materials involved.

The SMAPRO180 is available with several different optical options to fit your needs, including the Stereo Microscope shown in the image above. A few of our most popular optical kits are detailed below.

Download PDF Product Data Sheet HERE 

 

Stereo Microscope Kit, SW-SMA-5PG

Our standard machine mount Stereo Microscope Kit, SW-SMA-5PG is a valuable optical tool in microelectronics manufacturing where performance and reliability rank as job one.

The SW-SMA-5PG package adds a stereo microscope body, an adjustable intensity 60 LED microscope ring light, a 4-way adjustable E arm, 0.5x objective, and a pair of 10x eye pieces that specifically meet the standard requirements of the PG Welder, SMAPRO180 shown above and create a complete welding setup. Different eye pieces and objective lens sizes for specialized application and work heights are available upon request.

 

 Download PDF Product Data Sheet HERE

Digital Monocular Microscope Kit, SW-DMA-58N

Our most popular standard mount Digital Monocular Microscope Kit, Model SW-DMA-58N is a high resolution, high performance digital microscope. Complete with height and tilt adjustment, this assembly comes ready to adapt to the top of any of our PG or PCB Welders.

The SW-DMA-58N kit shown here consists of a digital monocular microscope, a high resolution CCD, an adjustable intensity 40 LED microscope ring light, and a 4-way adjustable E arm. The standard objective lens for this model is 0.5x but can easily be swapped out to accommodate to specialized magnification, work height, and application needs. The SW-DMA-58N camera utilizes a NTSC video interface. A monitor is not included in this kit but is available upon request.

 

Download PDF Product Data Sheet HERE

 

Trinocular Microscope Kit, SW-TMA-52N

For applications that require both standard and digital optics, we are proud to offer our Trinocular Microscope Kit, SW-TMA-52N. Integrating the features of a stereo and a digital microscope in one product, allowing the operator to view stereo and digital images of the objects simultaneously. This feature is great for operator training and situations where the operation is digitally recorded for record keeping.

The SW-TMA-52N package adds a trinocular microscope body, a SW-CCD-58N digital camera, an adjustable intensity 60 LED microscope ring light, 4-way adjustable E arm, 0.5x objective, and a pair of 10x eye pieces that specifically meet the standard requirements of the PG Welder, SMAPRO180 shown above and create a complete welding setup. Different eye pieces and objective lens sizes for specialized application and work heights are available upon request. The SW-CCD-58N camera utilizes a NTSC video interface. A monitor is not included in this kit but is available upon request.

Download PDF Product Data Sheet HERE